LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 3.2CL Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Component Tests >> Intermittent Wiper Relay

Intermittent Wiper Relay

NOTE: There should be continuity between the terminals as described in test below.
  1. Turn ignition switch to OFF position. Remove intermittent wiper relay. See COMPONENT LOCATIONS  .
  2. There should be continuity between the No. 1 and 2 terminals when power and ground are applied to the No. 3 and 5 terminals respectively. See Fig 1 .
  3. There should be continuity between the No. 2 and 4 terminals when power is removed.
Fig 1: Identifying Intermittent Wiper Relay Terminals
G99I50102Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals