LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 1.7EL Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel & Emissions Systems >> How to Set Readiness Codes >> HO2S Heater Monitor

HO2S Heater Monitor

NOTE: When the battery negative cable is disconnected, all readiness codes are cleared.
  1. Connect the scan tool to the Data Link Connector (DLC).
  2. Start the engine, and let the engine idle for 10 minutes.
  3. Check for the readiness code with the scan tool.
scientia non olet · About LEMON Manuals