LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 1.7EL Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Driver's Window Motor Test >> Pulser Test:

Pulser Test:

  1. Remove the 4P connector to the driver's window motor, and reconnect the 20P connector to the power window master switch.
  2. Connect the test leads of a voltmeter to the No. 3 and No. 4 terminals of the driver's window motor 4P connector.
  3. Run the motor by connecting power and ground to the No. 1 and No. 2 terminals. The voltmeter should read about 6V.
  4. If the voltage is not as specified, check for an open in the wires. If the wires are OK, replace the driver's window motor.
scientia non olet · About LEMON Manuals