LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2002 >> MDX Base, BGHA >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Openers) >> Tailgate Handle Replacement

Tailgate Handle Replacement

WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Put on gloves to protect your hands.
  1. Remove the tailgate trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
  2. Disconnect the handle cable (A) from the tailgate handle (B). Take care not to kink the cable.
    Fig 1: Disconnecting Handle Cable From Tailgate Handle
    G03641790Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the nuts, then remove the tailgate handle.
  4. Install the tailgate handle in the reverse order of removal, and note these items:
    • Make sure the handle cable is connected securely.
    • Make sure the tailgate opens properly.
scientia non olet · About LEMON Manuals