LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2002 >> MDX Base, BGHA >> Repair and Diagnosis >> Electrical >> Starters >> Bench Testing >> Brush Holder Test >> Removal

Brush Holder Test: Removal

  1. Remove the starter. See STARTER  under REMOVAL & INSTALLATION.
  2. Disconnect the wire from the "M" terminal, and remove the end cover.
  3. Place a 1.16" (29.4 mm) outside diameter plastic pipe on the armature. See Fig 1.
  4. Move the brush holder (A) up to the pipe (B) while holding the pipe so the brushes do not pop out from the holder.
Fig 1: Removing Brush Holder
G00308297Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals