LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2002 >> 3.2CL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - System & Component Testing) >> Idle Control System >> Starter Switch Signal >> Integra & 3.2TL

Integra & 3.2TL

WARNING: This page is about a different car, the 2001 Acura MDX, 2001 Acura Integra, 2001 Acura 3.5RL, 2001 Acura 3.2TL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.

Measure voltage by backprobing between PCM 32-pin harness connector terminal No. 24 (Blue/Orange wire, Blue/White on Integra) and PCM 25-pin harness connector terminal No. 20 (Brown/Yellow wire, Brown/Black on Integra) with ignition switch in START position. See Figure . If battery voltage is present, starter signal is okay. If battery voltage is not present, inspect fuse No. 13 (7.5-amp) in underdash fuse/relay box. If fuse is okay, repair open in Blue/Orange wire (Blue/White on Integra) between PCM 32-pin harness connector terminal No. 24 and fuse No. 13 (7.5-amp). If fuse is blown, repair short in Blue/Orange wire (Blue/White on Integra) between PCM 32-pin harness connector terminal No. 24 and fuse No. 13 (7.5-amp) or PGM-FI main relay. Replace fuse.

scientia non olet · About LEMON Manuals