LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2002 >> 3.2CL Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Variable Valve Timing Control System >> Variable Valve Timing & Lift Electronic Control Solenoid Valve (RSX) >> Removal & Installation

Removal & Installation

VARIABLE VALVE TIMING & LIFT ELECTRONIC CONTROL (VTEC) solenoid valve is located at rear of cylinder head.

  1. Disconnect VTEC solenoid valve 2-pin harness connector.
  2. Remove bolts holding cover and VTEC solenoid valve.
  3. Inspect filter behind VTEC solenoid valve and replace if necessary.
  4. To install, reverse removal procedure. Tighten valve to specification. See TORQUE SPECIFICATIONS . If VTEC solenoid valve filter was replaced, change engine oil and filter.
scientia non olet · About LEMON Manuals