LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2001 >> 3.5RL >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Stability Assistance (VSA) System >> Bleeding Brake System >> PRECHARGE Brake Line Bleeding

PRECHARGE Brake Line Bleeding

  1. Connect SCS Service Connector (07PAZ-0010100) or Honda PGM tester to 2-pin service check connector located under glove box. See Fig 1. Press parking brake pedal. Depress and hold VSA OFF switch. Turn ignition switch on.
  2. After VSA activation indicator goes off twice, release VSA OFF switch. After VSA activation indicator comes back on, depress and hold VSA OFF switch. After VSA activation indicator goes off, release VSA OFF switch. After VSA activation indicator starts blinking, press and hold VSA OFF switch until VSA indicator stops blinking.
  3. Turn ignition off. Repeat steps  1- 2 4 times.
Fig 1: Locating 2-Pin Service Check Connector
G98G10344Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals