Power Mirror Motor
WARNING: This page is about a different car, the 2003 Acura 3.2TL and 2002 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
Remove appropriate door panel and disconnect power mirror motor 13-pin connector. See DOOR PANEL under REMOVAL & INSTALLATION. See Fig 1 . Using fused jumper wires, check motor operation by applying power and ground as specified. See POWER MIRROR MOTOR TEST . If motor does not function as specified, replace appropriate motor assembly.
POWER MIRROR MOTOR TEST
| Application & Mirror Movement | (1) Battery Connection (+) & (-) | |||
|---|---|---|---|---|
| Tilt | ||||
| Up | 8 & 7 | |||
| Down | 7 & 8 | |||
| Swing | ||||
| Left | 7 & 6 | |||
| Right | 6 & 7 | |||
|
||||