Passenger's Power Window Motor
WARNING: This page is about a different car, the 2004 Acura 3.5RL, 2003 Acura 3.5RL, 2003 Acura 3.2TL, 2002 Acura 3.5RL, and 2002 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
Remove passenger's door panel. See DOOR PANEL under REMOVAL & INSTALLATION. Disconnect power window motor 2-pin connector. See Fig 1 or Fig 2 . Using a fused jumper wire, connect battery voltage to power window 2-pin connector terminal No. 1 (Blue/White wire). Using another jumper wire, ground power window 2-pin connector terminal No. 2 (Blue/Red wire). Motor should go up smoothly. When polarity is reversed, power window motor should go down smoothly. Replace power window motor if it does not operate smoothly in both directions.