Radiator Fan Control Module
Perform test with radiator fan control module 8-pin harness connector connected, ignition on and A/C switch OFF. See RADIATOR FAN CONTROL MODULE INPUT TESTS
. If cause of problem is discovered while performing tests, correct problem before continuing tests.
RADIATOR FAN CONTROL MODULE INPUT TESTS
| Pin No. (Wire Color) |
Test Condition |
Desired Results |
| 1 (Yellow) |
Check For Battery Voltage |
Battery Voltage |
| 2 (Black/Yellow) |
Check For Battery Voltage |
Battery Voltage |
| 3 (Yellow/White) |
Check For Battery Voltage |
Battery Voltage |
| 4 (Black) |
Check For Continuity To Ground |
Less Than One Volt |
| 5 (White/Green) |
Check For Continuity To Ground |
Less Tnan One Volt |
| 6 (White/Red) |
Check For Battery Voltage |
Battery Voltage |
| 7 (Black/Yellow) |
Check For Battery Voltage |
Battery Voltage |
| 8 (Green) |
Connected To Body Ground |
Condenser Fan & Radiator Fan Run |