Driver's Power Seat Switch Test: 3.2TL
Remove driver's power seat switch. Disconnect driver's power seat switch connectors. Using an ohmmeter, ensure switch continuity is as specified. See DRIVER'S POWER SEAT SWITCH CONTINUITY (3.2TL) table. See Fig 1 . If switch fails test, replace faulty switch.
DRIVER'S POWER SEAT SWITCH CONTINUITY (3.2TL)
| Position | Terminals | |
|---|---|---|
| Slide Switch | ||
| Forward | A1 & B5; A5 & B6 | |
| Backward | A1 & B6; A5 & B5 | |
| Recline Switch | ||
| Forward | B1 & B4; B2 & B3 | |
| Backward | B1 & B3; B2 & B4 | |
| Front Up-Down Switch | ||
| Up | A3 & B6; A4 & B5 | |
| Down | A4 & B6; A3 & B5 | |
| Rear Up-Down Switch | ||
| Up | A2 & B2; A6 & B1 | |
| Down | A6 & B2; A2 & B1 | |