LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2001 >> 3.2CL Base >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Vehicle Stability Assistance (VSA) System >> Programming >> Steering Angle Sensor Neutral Position Memorization >> Service Check Signal (SCS) Circuit Method

Service Check Signal (SCS) Circuit Method

NOTE: To ensure accuracy, the vehicle must be level.
  1. Clear the DTC. Short the service check signal circuit. See SERVICE CHECK SIGNAL (SCS) CIRCUIT METHOD  under DIAGNOSIS & TESTING. Release the parking brake. Press the brake pedal and hold it.
  2. Turn the ignition switch on. After the ABS indicator goes off, apply the parking brake, release the parking brake, and apply it again.
  3. The VSA activation indicator blinks twice in 2 seconds, and the indicator goes off. If the indicator does not go off, repeat from the first step.
  4. Turn the ignition switch off, then remove the Honda PGM Tester from the data link connector.
scientia non olet · About LEMON Manuals