LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2000 >> NSX-T 3.2 NA2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Performance System Self-Diagnostics) >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Retrieving DTCs Using Scan Tool

Retrieving DTCs Using Scan Tool

WARNING: This page is about a different car, the 2005 Acura NSX, 2004 Acura NSX, 2003 Acura NSX, and 2002 Acura NSX. However, it is still accessible from the selected car via links, so may be relevant.
  1. When the Malfunction Indicator Lamp (MIL) has been reported on, connect the Honda PGM Tester or an OBD-II scan tool to the 16-pin Data Link Connector (DLC) located under the glove box behind a removable cover. See Figure .
  2. Turn the ignition switch ON. With the Honda PGM Tester, begin troubleshooting as indicated by the tester. The DTC troubleshooting flowcharts are not needed with the tester; follow the tester's prompts. With the OBD-II scan tool, check the DTC and note it. Also check and note the freeze frame data. Refer to DIAGNOSTIC TROUBLE CODE DEFINITIONS  and begin diagnosis. See the OBD-II scan tool or Honda PGM Tester user's manuals for specific operating instructions.
scientia non olet · About LEMON Manuals