LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Starters) >> On-Vehicle Testing >> Clutch Interlock Switch (M/T) >> Integra

Clutch Interlock Switch (M/T): Integra

WARNING: This page is about a different car, the 2001 Acura MDX, 2001 Acura Integra, 2001 Acura 3.5RL, 2001 Acura 3.2TL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.

Remove lower instrument panel cover and driver's side knee bolster to gain access to clutch interlock switch connector. Disconnect 2-pin connector from clutch interlock switch. Using an ohmmeter, check continuity between switch terminals. Ensure continuity exists when clutch pedal is depressed and does not exist when clutch pedal is released. If readings are not as specified, adjust or replace clutch interlock switch. See CLUTCHES - FWD article.

scientia non olet · About LEMON Manuals