Except 3.5RL

WARNING: This page is about a different car, the 2001 Acura MDX, 2001 Acura Integra, 2001 Acura 3.5RL, 2001 Acura 3.2TL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.

Check starter solenoid for continuity between terminal "S" and armature housing (ground). See Fig 1 and Fig 2 . Check continuity between terminals "S" and "M". Continuity should be present. If continuity is not present, replace starter solenoid. If continuity is present, check for burning, pitting or other defects at contact points and face of starter solenoid plunger. Clean starter solenoid plunger surface, and polish with emery cloth or No. 500-600 sandpaper.

Fig 1: Identifying Solenoid Terminals (Integra)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Identifying Solenoid Terminals (3.2CL, 3.2TL & MDX)

Courtesy of AMERICAN HONDA MOTOR CO., INC.