LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L VTEC 4-CYL >> Overhaul >> Cylinder Block Assembly >> Cylinder Block

Cylinder Block

  1. Measure cylinder bore out-of-round and taper. If either out-of-round or taper exceeds specification, re-bore cylinder for oversize pistons. If any cylinder exceeds oversize bore service limit, replace cylinder block. See CYLINDER BLOCK  table under ENGINE SPECIFICATIONS.
  2. Using a feeler gauge and straightedge, measure cylinder block deck surface for warpage. Service limit is 0.003" (0.08 mm). If cylinder bore is okay, hone cylinder to obtain a 60-degree crosshatch pattern. After honing, wash cylinder bore with hot soapy water. Air-dry cylinder bore, and apply engine oil to prevent rusting.
scientia non olet · About LEMON Manuals