Turn Signal/Hazard Relay Input

WARNING: This page is about a different car, the 2001 Acura 3.5RL and 2001 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove turn signal/hazard relay from driver's underdash fuse/relay box located behind left kick panel. Check for bent, loose or corroded terminals. Repair as necessary and recheck system. If relay terminals are okay, perform turn signal/hazard relay input tests. Test each specified circuit for continuity or battery voltage as indicated. See Fig 1 or Fig 2 . Correct any problems as directed and recheck system. If no problems are found, replace turn signal/hazard relay and recheck system.

Fig 1: Turn Signal/Hazard Relay Input Test (3.2TL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Turn Signal/Hazard Relay Input Test (3.5RL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.