LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2000 >> 3.5RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panels) >> Component Tests >> Cruise Control Main Switch >> 3.2TL

Cruise Control Main Switch: 3.2TL

WARNING: This page is about a different car, the 2001 Acura 3.5RL and 2001 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Traction Control System (TCS) and cruise control main switch from driver's switch panel. Disconnect main switch 8-pin connector. With switch in OFF position, continuity should exist between switch terminals No. 1 and 2, and between terminals No. 4 and 7. See Fig 1. Go to next step.
  2. With main switch in ON position, continuity should exist between switch terminals No. 1 and 2, and between terminals No. 4, 5 and 7. See WIRING DIAGRAMS . If continuity is not as specified, check bulbs and replace as necessary. If bulbs are okay, replace TCS/cruise control main switch.
Fig 1: Identifying Main Switch Connector Terminals (3.2TL)
G99B05164Courtesy of AMERICAN HONDA MOTOR CO., INC.