Brake Switch Test: 3.2TL
WARNING: This page is about a different car, the 2001 Acura 3.5RL and 2001 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
Locate brake switch above brake panel. Disconnect brake switch connector. Check for continuity between brake switch connector terminals No. 1 and 4. See Fig 1. Continuity should exist. Depress brake pedal and check for continuity between brake switch connector terminals No. 2 and 3. Continuity should exist. If continuity is not as specified, adjust brake pedal height and recheck brake switch operation. See appropriate DISC & DRUM article in BRAKES.