LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2000 >> 1.6EL XS, Automatic >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Back-up Light Switch >> Replacement

Back-up Light Switch: Replacement

NOTE: To test the back-up light switch, see CIRCUIT DIAGRAM .
  1. Disconnect the connector, then remove the back-up light switch connector from the connector clamp.
  2. Remove the back-up light switch.
    Fig 1: Back-Up Light Switch And Washer With Torque Specifications
    G06288051Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the new washer and back-up light switch.
  4. Connect the back-up light switch connector.
scientia non olet · About LEMON Manuals