LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2000 >> 1.6EL XS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Interlock System >> Shift Lock Solenoid Replacement

Shift Lock Solenoid Replacement

  1. Remove the front console (see CONSOLES AND BEVERAGE HOLDER REMOVAL/INSTALLATION ).
  2. Shift to [P] position, then disconnect the 2P connector from the shift lock solenoid.
  3. Remove the A/T gear position switch.
  4. Remove the two screws securing the shift lock solenoid, then remove the shift lock solenoid.
  5. Apply silicone grease to the shift lock solenoid plunger mating surfaces with the shift lock stop.
  6. Install the shift lock solenoid and connect the shift lock solenoid plunger to the shift lock stop.
    Fig 1: Identifying Shift Lock Solenoid, Shift Lock Stop And Screws
    G06288270Courtesy of AMERICAN HONDA MOTOR CO., INC.
  7. Be sure to install the projected tips of the shift lock solenoid in the holes of the position plate, then tighten the screws.
  8. Install the A/T gear position switch.
  9. Connect the 2P connector to the shift lock solenoid.
  10. Check the shift lock solenoid operation.
scientia non olet · About LEMON Manuals