LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2000 >> 1.6EL XS, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Accessory Power Sockets >> Test

Accessory Power Sockets: Test

  1. Disconnect the 2P connector from the accessory power socket.
  2. Inspect the connector terminals to be sure they are all making good contact.
    • If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
    • If the terminals look OK, go to step 4.
      Fig 1: Identifying Accessory Power Socket 2P Connector
      G06289644Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Turn the ignition switch ACC (I), and check for voltage between the A (+) and B (-) terminals. There should be battery voltage.
    • If there is no battery voltage, check for:
      • blown No. 27 (15 A) fuse in the under-dash fuse/relay box.
      • poor ground (G401, G402).
      • an open in the wire.
    • If there is battery voltage, replace the accessory power socket.
scientia non olet · About LEMON Manuals