Passenger's Window Switch Test

Remove the armrest (see DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 5P connector, then remove the mounting screw from the passenger's switch.

Fig 1: Identifying Passenger's Window Switch Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Switch side of 5P terminal:

Fig 2: Identifying 5P Connector Terminal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 3: Continuity Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.