Passenger's Window Motor Test

Front: 

1. Remove the passenger's door panel (see DOOR PANEL REMOVAL/INSTALLATION ).
2. Disconnect the 2P window motor connector.
   Fig 1: Identifying Front Passenger's Window Motor 2P Connector

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Check window motor operation by connecting power and ground according to the table.
   CAUTION: When the motor stops running, disconnect one lead immediately.
4. If the motor does not run or fails to run smoothly, replace it.
   Fig 2: Front Passenger's Window Motor 2P Connector Terminal Position

   Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rear: 

1. Remove the passenger's door panel (see DOOR PANEL REMOVAL/INSTALLATION ).
2. Disconnect the 2P window motor connector.
   NOTE: The illustration shows the right rear window motor; the left rear window motor is symmetrical.
   Fig 3: Identifying Rear Passenger's Window Motor 2P Connector

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Check window motor operation by connecting power and ground according to the table.
   Fig 4: Rear Passenger's Window Motor 2P Connector Terminal Position

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
   CAUTION: When the motor stops running, disconnect one lead immediately.
4. If the motor does not run or fails to run smoothly, replace it.