1999-2000 Models
WARNING: This page is about a different car, the 1997 Acura 1.6EL. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When prying with a flat tip screwdriver, wrap it with protective tape to prevent damage.
NOTE:
- Take care not to scratch the seat covers and body.
- Remove the front seat through the door opening.
Driver's:
Reassemble in the reverse order of disassembly, and note these items:
- Make sure the bushing and pivot washer are installed properly.
- To connect the connecting wire, twist it 90°.
- Replace the back cover clips with new ones.
- To prevent wrinkles when installing the seat-back cover, make sure the material is stretched evenly over the pad.
- Apply multipurpose grease to the moving portion of the seat track.