LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1999 >> NSX Base, 3.2 NA2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls - System & Component Testing) >> Fuel Systems >> Fuel Injector Resistor >> Testing

Fuel Injector Resistor: Testing

WARNING: This page is about a different car, the 1996 Acura NSX-T, 1996 Acura NSX, 1995 Acura NSX-T, and 1995 Acura NSX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the fuel injector resistor connector. See Fig 1 and Fig 2 .
  2. Check for resistance between each of the fuel injector resistor terminal Nos. 2, 3, 4, 6, 7 and 8 and the power terminal No. 5.
  3. Resistance should be 5-7 ohms.
  4. Replace the fuel injector resistor with a new one if any of the resistances are outside of the specification.
Fig 1: Locating Fuel Injector Resistor
G00082842Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Identifying Fuel Injector Resistor Terminals
G00107035Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals