Right Mirror Inoperative

Connect a jumper wire between 10-pin connector terminal No. 9 (Yellow/Black wire) and terminal No. 6 (Yellow/White wire). See Figure. Connect jumper wire between ground and 10-pin connector terminal No. 5 (Blue/White wire) or terminal No. 3 (Light Green wire). Turn ignition on. Right mirror should tilt down or swing left. If mirror does not tilt down or wing left, check for open in Blue/White or Light Green wire. See WIRING DIAGRAMS . If mirror does not tilt down or does not swing left, check for open in Yellow/Black wire. If wires are okay, check mirror switch. See POWER MIRROR SWITCH TEST  under COMPONENT TESTS.