Left Mirror Inoperative

Connect a jumper wire between 10-pin connector terminal No. 9 (Yellow/Black wire) and terminal No. 7 (Blue/Green wire). See Figure. Connect jumper wire between ground and 10-pin connector terminal No. 5 (Blue/White wire) or terminal No. 4 (Blue/Orange wire). Turn ignition on. Left mirror should tilt down or swing left. If mirror does not tilt down or swing left, check for open in Blue/White or Blue/Orange wire. See WIRING DIAGRAMS . If mirror does not tilt down or swing left, check for open in Blue/Green wire. If wires are okay, check mirror switch. See POWER MIRROR SWITCH TEST  under COMPONENT TESTS.