A/C Clutch Relay (2.3CL, 3.0CL & 3.5RL)

Relay is located in underhood fuse/relay box. Remove relay. Check continuity between terminals No. 1 and 3. See Fig 2. If continuity exists, replace relay. Using fused jumper wires, connect 12-volt battery power and ground to terminals No. 2 and 4. Continuity should exist between terminals No. 1 and 3. If continuity does not exist, replace relay.

Fig 1: Identifying A/C Clutch Relay Terminals (Integra & 3.2TL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Identifying A/C Clutch Relay Terminals (2.3CL, 3.0CL & 3.5RL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.