DTC 65: Abnormal Wheel Speed Sensor Signal Input
WARNING: This page is about a different car, the 1998 Isuzu Rodeo, 1998 Isuzu Amigo, and 1998 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
- Connect scan tool DLC. Select SNAP SHOT MANUAL TRIGGER. With wheel speed data displayed, test drive vehicle at 18 MPH. Press F9 key on scan tool. Check speed data for each wheel. Go to next step.
- Check for play in wheel speed sensor, sensor rotor or wheel bearing. Also, check for powdered iron sticking to sensor components. Repair as necessary. If no problem is found, go to next step.
- Check for faulty harness between EHCU and appropriate wheel speed sensor. Repair as necessary and perform system self-check. See ANTI-LOCK SYSTEM SELF-CHECK under DIAGNOSIS & TESTING. If no problem is found, replace EHCU.