DTC 13: 2WD Controller In 4WD Vehicle Controller
WARNING: This page is about a different car, the 1998 Isuzu Rodeo, 1998 Isuzu Amigo, and 1998 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Remove EHCU coil integrated module controller connectors. Check connector terminals for proper terminal contact. Repair as necessary. If terminal contact is okay, go to next step.
- Check 4WD controller for proper operation. Repair as necessary. If no problem is found, replace EHCU.