LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Wiper/Washer Systems) >> Component Tests >> Intermittent Wiper Relay Test

Intermittent Wiper Relay Test

WARNING: This page is about a different car, the 1997 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Remove relay from relay box. See COMPONENT LOCATIONS.
  2. Using an ohmmeter, ensure continuity exists between relay terminals No. 3 and 5, then between terminals No. 1 and 4. See WIRING DIAGRAMS. Continuity should not exist between terminals No. 1and 2.
  3. Using fused jumper wires, apply battery voltage and ground between relay coil terminals No. 3 and 5. Continuity should now exist between terminals No. 1 and 2. Ensure continuity does not exist between terminals No. 1 and 4. Replace relay if continuity is not as specified.
scientia non olet · About LEMON Manuals