Gearshift Position Switch
WARNING: This page is about a different car, the 1997 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen gear position switch mounting bolts. Set gearshift lever to Neutral position. Rotate gearshift position switch lock washer projected tip, (located under control lever), until aligned with Neutral position mark on gearshift position switch.
- Tighten gear position switch mounting bolts to 9 ft. lbs. (12 N.m). Turn ignition switch to ON position. Move gear shift lever to each gear position and ensure gear position indictor is synchronized with gearshift lever position.
- Set parking brake and depress brake pedal. Attempt to start vehicle in each gear position. Engine should only start in Neutral or Park. Ensure gearshift lever cannot be moved from Neutral to Reverse without pushing shift lever through guide. Ensure backup lights illuminate when gearshift lever is in Reverse.