LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> PULSER Test (Driver's Window Motor)

PULSER Test (Driver's Window Motor)

NOTE: Pulser is integral part of driver's window motor assembly. If pulser is defective, replace motor assembly.

Connect test leads of analog ohmmeter to driver's power window motor 4-pin connector terminal "C" (Blue wire) and terminal "D" (Black wire). Using jumper wires, connect battery voltage to 4-pin connector terminal "A" (Red/Blue wire) and ground to terminal "B" (Red/Yellow wire). See Figure . If ohmmeter needle does not swing back and forth while motor operates, replace motor.

scientia non olet · About LEMON Manuals