LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 3.5RL Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - M5DA >> Component Testing >> MAINSHAFT Speed Sensor

MAINSHAFT Speed Sensor

  1. Mainshaft speed sensor is located on the transaxle. See Figure . Disconnect harness connector for mainshaft shaft speed sensor from transaxle sub-harness.
  2. Using ohmmeter, check resistance between terminals of mainshaft speed sensor harness connector. Replace mainshaft speed sensor if resistance is not 400-600 ohms at 70°F (20°C).
scientia non olet · About LEMON Manuals