LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 3.0CL >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Starters) >> Bench Testing >> Brushes & Springs

Brushes & Springs

WARNING: This page is about a different car, the 1999 Acura 3.0CL and 1999 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach a spring scale to brush spring. Measure tension of spring as spring lifts off brush. If spring tension is not within specification, replace brush holder assembly. See STARTER SPECIFICATIONS  .
  2. Check brush length. If brush length is not within specification, replace brushes. See STARTER SPECIFICATIONS  . If brushes are replaced, wrap No. 600 sandpaper around commutator. Rotate commutator across face of brushes to seat new starter brush assemblies.
scientia non olet · About LEMON Manuals