Removal & Installation: Accumulator: Installation
WARNING: This page is about a different car, the 1997 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.
Install accumulator onto ABS modulator unit. See Fig 1 . Tight en bolts to specification. See TORQUE SPECIFICATIONS . Install ABS modulator unit into vehicle. See ABS MODULATOR UNIT. Bleed air from system. See ACCUMULATOR , MODULATOR & ABS PUMP (POWER UNIT) BLEEDING under BLEEDING BRAKE SYSTEM. Start engine and allow to idle a few minutes. Ensure ABS indicator light goes out and there are no brake fluid leaks. Stop engine and ensure brake fluid level in reservoir is filled to MAX level.