Abs Pump Motor: Installation
WARNING: This page is about a different car, the 1997 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.
Install ABS pump motor onto ABS modulator unit. Install ABS modulator unit into vehicle. See ABS MODULATOR UNIT. Bleed air from system. See ACCUMULATOR , MODULATOR & ABS PUMP (POWER UNIT) BLEEDING under BLEEDING BRAKE SYSTEM. Start engine and allow to idle a few minutes. Ensure ABS indicator light goes out and there are no brake fluid leaks. Stop engine and ensure brake fluid level in reservoir is filled to MAX level.