Parking Brake Switch Test
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1998 Acura 3.5RL, 1998 Acura 3.2TL, 1998 Acura 2.5TL, 1997 Acura 3.5RL, and 1997 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
On 2.5TL and 3.2TL, remove rear console end cover from parking brake lever. On 3.5RL, remove instrument panel lower cover and knee bolster. On all models, disconnect parking brake switch connector. Check for continuity between switch terminal and ground. Continuity should exist with parking brake applied. Continuity should not exist with parking brake released. If continuity is not as specified, check parking brake switch plate adjustment with parking brake switch. If adjustment is okay, replace parking brake switch.