LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 3.0CL >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Disc Brakes) >> Adjustments >> Stoplight Switch

Stoplight Switch

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1998 Acura 3.5RL, 1998 Acura 3.2TL, 1998 Acura 2.5TL, 1997 Acura 3.5RL, and 1997 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate stoplight switch, above brake pedal. Turn ignition switch to OFF position. Using hand pressure, check brake pedal free play. See BRAKE PEDAL HEIGHT & FREE PLAY  table. If brake pedal free play is not as specified, go to next step.
  2. Loosen stoplight switch lock nuts. Turn stoplight switch inward until plunger threaded end is touching pedal arm pad. See Figure. Back off switch 1/4 turn, until clearance between threaded end and pedal end is 0.01" (0.3 mm). Tighten lock nuts. Ensure brakelights go off when pedal is released.
scientia non olet · About LEMON Manuals