Indicator Light
WARNING: This page is about a different car, the 1998 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.
- Remove trim plate and screws from behind inner door handle. DO NOT remove inner handle from door panel. Remove screw at rear of door panel and door stop. Pull firmly inward to release clips for door panel and lift upward to remove. Disconnect inner handle cable and electrical connectors.
- Set door panel face down on covered, non-scratching surface. Remove screws attaching indicator light to top of door panel. Remove indicator light and bezel assembly. To install, reverse removal procedure.