Abs Fail-Safe Relay & Gauge Relay
WARNING: This page is about a different car, the 1998 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.
Remove relay from underhood relay block "C" next to radiator. See Figure . With relay disconnected, use DVOM to check continuity between relay terminals No. 2 and 4. See Figure . Continuity should exist. Apply battery voltage across terminals No. 3 and 5. Continuity should exist between terminals No. 1 and 2. If continuity is not as indicated, replace relay.