LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 3.0CL >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (3.0L V6) >> Overhaul >> Cylinder Block Assembly >> Piston & Rod Assembly

Piston & Rod Assembly

WARNING: This page is about a different car, the 1999 Acura 3.0CL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connecting rods are available in 4 size tolerance ranges. Rod size depends on crank journal bore. A reference number between 1 and 4 is stamped on side of rod's big end bore. Any combination of numbers between 1 and 4 may be found in engine. Nominal connecting rod's big end bore is 2.20" (56 mm).
    NOTE: Reference numbers are for big end bore code. Numbers do not indicate rod position in engine.
  2. Install piston and connecting rod with arrow on top of piston pointing toward timing belt side of engine.
scientia non olet · About LEMON Manuals