Engine Identification
WARNING: This page is about a different car, the 1999 Acura 3.0CL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For repair procedures not covered in this article, see
ENGINE OVERHAUL PROCEDURES article in GENERAL INFORMATION.
Engine identification code is stamped on block, below cylinder head mating surface. First 5 characters of code indicate engine type. See ENGINE IDENTIFICATION CODES table. Sixth and seventh digits identify emissions group. Last 5 digits represent engine serial number.
ENGINE IDENTIFICATION CODES
| Application | Code |
|---|---|
| 3.0L | J30A1 |