LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 3.0CL >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (2.3L 4-Cylinder) >> Overhaul >> Cylinder Block Assembly >> Piston Pin Installation

Piston Pin Installation

WARNING: This page is about a different car, the 1999 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install one piston snap ring. Coat piston pin bore, connecting rod bore and piston pin with engine oil. Heat piston to 158°F (70°C).
  2. Install piston pin into piston/connecting rod assembly. Assemble piston and connecting rod with embossed marks on same side. Install remaining snap ring.
scientia non olet · About LEMON Manuals