LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 3.0CL >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.0L V6 >> Overhaul >> Cylinder Block Assembly >> Piston & Rod Assembly

Piston & Rod Assembly

  1. Connecting rods are available in 4 tolerance ranges. Rod size depends on crank journal bore. A reference number between 1 and 4 is stamped on side of rod's big end bore. Any combination of numbers between 1 and 4 may be found in engine.
    NOTE: Reference numbers are for big end bore code. Numbers DO NOT indicate rod position in engine.
  2. Nominal connecting rod's big end bore is 2.20" (56 mm). Install piston and connecting rod with arrow on top of piston toward timing belt side of engine.
scientia non olet · About LEMON Manuals