LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 3.0CL >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> A/C-Heater System >> Testing >> Power Transistor

Power Transistor

CAUTION: Be careful not to damage locking tab when disconnecting and connecting wire terminal. Insulate Orange/Black wire terminal from body until testing is completed.

Remove Orange/Black wire terminal from power transistor 3-pin connector. Connect 1.2-3.4 watt bulb as shown. See Fig 1 . Reconnect 3-pin connector to power transistor. Turn ignition on. If blower motor runs, power transistor is okay. If blower motor does not run, replace power transistor.

Fig 1: Testing Power Transistor
G96E31124Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals