LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 2.3CL Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Removal & Installation (2.3CL & 2.5TL)

Removal & Installation (2.3CL & 2.5TL)

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Raise and support vehicle. Remove fuel tank drain bolt and empty fuel tank. Remove fuel line covers. On 2.5TL, remove fuel line protector. Disconnect lines.
  2. Place a jack under tank. Remove strap nuts, and allow straps to fall free. Disconnect all electrical connectors. Remove fuel tank. If fuel tank sticks, carefully pry fuel tank off mount using a pry-bar. Remove fuel pump mounting nuts and fuel pump.
  3. To install, reverse removal procedure. Install drain bolt with NEW washer. On 2.5TL, coat drain bolt with rubber sealer (Noxrust 124B). Allow rubber sealer (Noxrust 124B) to dry for 20 minutes.
scientia non olet · About LEMON Manuals