LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1997 >> 3.0CL >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Cruise Control System) >> Component Tests >> Set/Resume Switch Test

Set/Resume Switch Test

WARNING: This page is about a different car, the 1997 Acura 2.2CL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable air bag system. See AIR BAG RESTRAINT SYSTEM article. Remove instrument panel lower cover. Disconnect combination switch Blue 20-pin connector located under left side of instrument panel. Using an ohmmeter, check switch continuity between specified 20-pin connector terminals.
  2. With SET button in ON position, continuity should exist between terminals No. 16 (Light Green/Blue wire) and No. 13 (Green/Red wire). With RESUME button in ON position, continuity should exist between terminals No. 4 (Light Green/Black wire) and No. 16 (Light Green/Blue wire). If continuity does not exist, replace SET/RESUME switch. If continuity exists, switch is okay.
scientia non olet · About LEMON Manuals